How to easy Shoot CRT

Table of Contents

How to shoot crt shorting with G1 - Damage to shooter tubes or short cathodes with G1. Symptoms tv can live normal, sound is also normal only the screen does not display the image alias blank with a certain color with horizontal lines all over the screen. This is caused by a short cathode of G1screen.

When the shorted red cathode (R) then the screen will blank with a horizontal line-line horizontal. When the shorted green cathode (G) then the screen will blank green with horizontal line-line. When the short blue cathode (B) then the screen will blank blue with horizontal line-line. Probably many have discussed this issue. But this time I will share an easy way to restore crt tube without crt restorer tool.

But before that, not necessarily the shorting cathode however, the color booster transistor on blog r, g, b there is one that shorting. Therefore it is necessary to check intensively before making sure the cathode shorted with G1.

If after checking on rgb blog but no results, it means crt is broken. To fix the TV due to shorting one of the cathodes it can be fixed by using the G2 screen voltage from the flyback. How to? The trick is the first tin suck on the cracked cocktail socket pin. Unplug the G2 screen from pcb. Then connect the G2 screen cable to the cathode crack socket pin that has been sucked tin. Keep the cathode pin path crt was completely clean from connection to pcb and just connect to G2 screen cable only.

Connected settings and the path is clean. Turn on the tv briefly for about 5 seconds in ON condition. Not in standby condition. If the condition of standby tv first switch from the remote or channel button. Just turn on the moment. Marked craaak from the flyback and immediately turn off the tv. When finished.Replace the G2 screen cable, connect back to pcb on the original place.Then the socket socks cocktail socks cock again.Ynow the tv.If the picture is out of normal, it means already successful.If not yet, repeat the above step.

How to shoot the tube above is the easiest and safest. Without the need to use residual flyback voltage, which is dangerous and at higher risk. That's the way of me. thank you